We just replaced our pads and worked on the pump. Issues before the pads were filled with cotton and deposits and the high cool would drop down for a second or 2 and then go back to high speed. Once we replaced everything it was fine. Now on high cool the house is not getting cool like before. Water is in pads and pumping through the distributor lines.
Swamp cooler is not cooling
- Thread starter nmmom
- Start date
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
Similar Threads
Forum statistics
Latest Threads
-
Fishing for desk lamp advice: Electrical fitting ‘fixing’ needed
- Started by robdms
-
Restore wooden boat model.
- Started by SomeOfTheGear
-
wardrobe doors repair
- Started by nvb272
-
dropped tiles
- Started by nvb272
-
Full throttle and maximum tension in dirt "flight" with Tenere 700
- Started by mallllias
-
How Thick should Plywood be for a Bed?
- Started by anahitakhatri
-
Baxi Bermuda 552 Back Boiler no Heating
- Started by Mark Culverhouse
-
Leaf Blower not working
- Started by Kevin1908
-
Power station bricked?
- Started by CVrider
-
Bougerv Fort 1000 stopped working
- Started by CVrider