Shower sealing

Joined
Jun 19, 2023
Messages
1
Reaction score
0
Country
United Kingdom
Hi, does the shower cubicle, base etc. always have to be dry before being sealed?

We just had a bathroom re-fit and the shower is leaking in a number of places from the cubicle. The builder is returning to re-seal the shower but insists it doesn't need to be dry before doing so.

Also, should the shower always be sealed between the shower base and the the adjacent tiled walls?

Many thanks.
 
Joined
Jun 23, 2023
Messages
2
Reaction score
0
Country
Ireland
You should always seal the shower tray otherwise water will likely penetrate through gaps and eventually into the subfloor.

When you are sealing it is best apply to a dry surface as water can potentially create air pockets resulting in an insufficient bond. Best to do the job right and do it once.
 
Joined
Jul 3, 2023
Messages
1
Reaction score
0
Country
United Kingdom
Hi Tours,

No, the shower cubicle, base, etc. does not always have to be dry before being sealed. However, it is important that the surface is clean and free of any dirt, dust, or debris. If there is any moisture present, it is important to dry it thoroughly before applying the sealant. This will help to ensure that the sealant adheres properly and prevents leaks.

Yes, the shower should always be sealed between the shower base and the adjacent tiled walls. This will help to prevent water from seeping behind the tiles and causing damage to the wall. It is also important to seal any other areas where the shower cubicle meets the walls or floor. This includes the corners, edges, and any other areas where there is a gap.

If your shower is leaking, it is important to have it sealed as soon as possible. Leaking water can cause damage to the shower cubicle, walls, and floor. It can also create a mold problem.

The builder is correct in saying that the shower does not need to be completely dry before being sealed. However, it is important that the surface is clean and free of any moisture. If you are concerned about the sealing job, you can always ask the builder to use a clear silicone sealant. This type of sealant is easy to see and will allow you to inspect the seal for any leaks.

I hope this information is helpful. Please let me know if you have any other questions.

Best Regards,
Ron Pemberton
Royal Bathrooms
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Members online

No members online now.

Forum statistics

Threads
128,920
Messages
1,266,502
Members
10,644
Latest member
rapid

Latest Threads

Top