I'm looking for ideas on installing outlets in my pole barn. I would like to comply with NECS 2011 if possible.
What I would like to do is run a 20amp 120V and a 50amp 220v run 24ft along the wall that the panel is on with the option of continuing the circuit at a later date around the rest of building.
The biggest hurdle I see is wiring around the 4x6 posts. Can I within code run Romex along the wall and go in back of those 4x6 posts when I run into them? Can I mount boxes to the cladding rail going around the building? What would be the best way to run wire up to lights?
Photos:
MMM.gunco.net/gallery/showphoto.php?photo=18104
MMM.gunco.net/gallery/showphoto.php?photo=18106
MMM.gunco.net/gallery/showphoto.php?photo=18105
What I would like to do is run a 20amp 120V and a 50amp 220v run 24ft along the wall that the panel is on with the option of continuing the circuit at a later date around the rest of building.
The biggest hurdle I see is wiring around the 4x6 posts. Can I within code run Romex along the wall and go in back of those 4x6 posts when I run into them? Can I mount boxes to the cladding rail going around the building? What would be the best way to run wire up to lights?
Photos:
MMM.gunco.net/gallery/showphoto.php?photo=18104
MMM.gunco.net/gallery/showphoto.php?photo=18106
MMM.gunco.net/gallery/showphoto.php?photo=18105
Last edited: