I am upgrading my home service from 100A to 200A, I have an old farm house and there is a disconnect lever that goes up to a box on the pole then the wires go from there to my house and down to my panel. The meter socket is on the pole. am I able to just replace the head and wire that are on my house an install them in PVC and then run into my new 200A service panel?
100A service to a 200a
- Thread starter Matt1024
- Start date
- Joined
- Apr 2, 2015
- Messages
- 84
- Reaction score
- 8
Picture please .
God bless
Wyr
God bless
Wyr
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
Similar Threads
Forum statistics
Latest Threads
-
Chain for roller blinds
- Started by Oldguy
-
Close fence gap?
- Started by wimbly
-
B and Q clearance tiles
- Started by webber84
-
Honeywell ST7100 replacement problem
- Started by nemo2000
-
Fishing for desk lamp advice: Electrical fitting ‘fixing’ needed
- Started by robdms
-
Restore wooden boat model.
- Started by SomeOfTheGear
-
wardrobe doors repair
- Started by nvb272
-
dropped tiles
- Started by nvb272
-
Full throttle and maximum tension in dirt "flight" with Tenere 700
- Started by mallllias
-
How Thick should Plywood be for a Bed?
- Started by anahitakhatri